2) HortiMaX CX500 for programs/cont

2) HortiMaX CX500 for programs/controls
2.1 Climate controls per block 20&22
2 x air temperature- and relative humidity measurement for MTVactive sensor box, dry / wet bulb (PT100) with water container level switch and ventilator; 2 x single sided side wall ventilation group (time controlled); 2 x shading screen group (time controlled); 2 x HAF recirculation ventilation group
2.2 Central controls
Weather station measurements; Wind direction (1 - 360°); Wind speed (0 - 40 m/S); Precipitation warning (yes/no); Outside temperature measurement (-25 to + 50°C); Radiation measurement (max. 1,300 Watt /m2); Outside humidity measurement (0-100%); Barometric pressure measurement (hP); Up-to-date weather information is essential to accurately controlling the greenhouse climate. That is why the Weather Station feature enables this information to be shown on the screen continuously.
2.3 Water controls
Supply group: 1 x system pump control; 1 x litre counter group for draw-off group.
EC group: 1 x EC group with EC measurement and pump- or valve control (A+B tank); 1 x EC measurement for monitoring and safe guarding accuracy; 2 x fertilizer tanks (A+B)
pH group: 1 x pH group with pH measurement and pump- or valve control; 1 x pH measurement for monitoring and safe guarding accuracy; 1 x pH tank Acid
Irrigation groups and valves: 1 valve group; 2 irrigation valve control
3) HortiMaX CX500 General information
The HortiMaX CX500 hardware consists of a central computer and distributed I/O modules. These I/O modules are connected to the central computer via a bus system. The HortiMaX CX500 computer is operated with Synopta 3 Lite userprogram.
3.1 To suit your requirements, your HortiMaX CX500 computer includes:
1 pc. HortiMaX CX500/600 central cabinet, IPC MOD3 panel. Containing: 1 pcs. Alarm card; 1 pcs. DO-16/AI-16
4) Synopta 3 Lite interface for CX500
4.1 CX500 computer interface Synopta 3 Lite
Synopta 3 Lite is a user-friendly operating program for the CX500 computer. This user-friendly program offers features including visually and graphically adjusting setup lines, backup programs and data analysis graphs. Synopta 3 Lite programs: SynLines 3 graphic settings; SynGraph 3 historical graphics (30 days).
please note: A PC is not included in this quotation and should be provided by a third party.
5) Sensors and amplifiers
5.1 Climate and energy sensors and amplifiers
2 pcs.MTVactive sensor box,2 x PT100 dry/wet bulb+ mech.ventilator 4-20mA.MTVactive sensor box 4-20mA
5.2 Meteo Go! weather station:
Wind direction (1 - 360°); Wind speed (0 - 40 m/S); Precipitation warning (yes/no); Outside temperature measurement (-25 to + 50°C); Radiation measurement (max. 1,300 Watt /m2).
6) FertiMiX CX600 mixing tank dosage unit; capacity 60 m³/Hr; 3.5 Bar.
Note: This unit is designed to irrigate 4 Ha (KHU A)
The FertiMiX CX600 is designed to control either indoor or outdoor sprinkler, fogging or drip irrigation systems without recirculation, involving substrate or other growing media. example of an CX600 dosage unit. The FertiMiX CX600 ensures that the right volume of water is applied, with the right EC and pH levels, at the right times.
Thanks to its many configuration options, the FertiMiX CX600 can be tailored to the exact needs of your nursery or glasshouse application.
The FertiMix CX600 is suitable for dosing fertilisers using either direct injection or mixer tanks. It allows you to simultaneously dose fertilisers from up to 8 fertiliser tanks in any ratio required.
Regardless of whether you work with compound or simple fertilisers, the FertiMiX CX600 will create the fertigation mixture or recipe you need in no time at all. The system can be supplied with two EC sensors and two pH sensors, enabling you to monitor the composition of your irrigation water. Operating the FertiMiX CX600. The FertiMiX CX600 will be controlled by the CX500 computer via Synopta 3 Lite operating program. The specified power supply is 3x 400V/50Hz with neutral and GND
CX600 mixing tank dosage unit, capacity 60 m3/Hr, consisting of: 1 pc. Stainless steel frame with adjustable legs, size 200 x 120cms; 1 pc. FertiMiX CX600 including an EC2/pH2 module for EC control and monitoring, pH control and monitoring and litre counting and a CP-MOD DO-16/AI-16 module to be controlled by the CX500 computer. 1 pc. Main switch (max. 40Amp.) with back wall mounting.
Switching of system pump: 1 pc. Manual-Off-Automatic switch for pump control with 24Vac output; 1 pc. Pump switch with soft starter (3-phase, 3-line control) for 11kW pump.
System pump: 1 pc. Lowara SHE 50-200/110; 1 pc. Water temperature protection on pump; 1 pc. Main pipe Ø110mm for SHE/FHE50 pump, pressure pipe with ECmeasurement point, branch for shunt pipe and check valve; 1 pc. Filling pipe Ø110mm with Bermad 3” float-controlled membrane valve; 1 pc. Mixing tank, blue polyethylene, contents 500 litres with mounting points for dosing valves, main and shunt pipes; 2 pc. Fertiliser dosing module with venturi, dosing valve 50Hz, manual regulating valve and flow meter for max. 600 l/h, incl. 12 m hose and filter; 1 pc. Acid dosing module with venturi, dosing valve 50Hz, manual regulating valve and flow meter for max. 100 l/h incl. 10 m hose and acid filter; 1 pc. Shunt pipe for max. 5 venturies with ball valve, filter, non-return valve, pressure regulator, pressure gauge and lines for EC en pH measurement.
Filtration: 1 pc. Semi automatic filter 4”,130 micron.
Sensors: 2 pc. EC sensor, with adaptor mounted in one of the installation points; 2 pc. pH sensor, type PHC, with adaptor mounted in one of the installation points; 1 pc. F15-P0 flow sensor for litre counting and flow monitoring; 1 pc D”125 PP saddle for F15-P0.
Extra: 1 pc. calibration fluid ph-4 (20ml); 1 pc. calibration fluid ph-7 (20ml); 1 pc. calibration fluid EC-5 (20ml)
6) Pricing Your nett price for CX500 climate/irrigation computer and FertiMiX unit €22.540,-
When you build the other 6 greenhouses you need the options below:
7.1 Climate controls extra 6 blocks
7.2 Water controls (for second unit KHU B)
7.3 Climate hardware ,sensors and amplifiers
1 pc. HortiMaX CX500 extension cabinet MOD 4.containing: 2 pcs. DO-16/AI-16; 1 pcs. DO-16/AI-16; 6 pcs. MTV active sensor box, 2 x PT100 dry/wet bulb + mech. ventilator 4-20mA. MTVactive sensor box 4-20mA
7.3 Irrigation hardware and sensors.
1 pcs FertiMiX CX600 mixing tank dosage unit; capacity 60 m³/Hr; 3.5 Bar.This unit is needed for KHU B has exactly the same specifications as you see above at point 6.
Option Pricing: Your nett price 1x extra FertiMix unit and 6 blocks extension: €23.690,--NOTE: You need the extra FertiMiX unit when you start building more than 4 Ha, when you build the 2 other blocks in KHU A you only need some extra software and 2 MTV active sensors for temperature and humidity measurement.
Terms and Conditions:
Delivery: Ex Works HortiMaX Pijnacker, the Netherlands (unpacked)Freight costs, insurance and transportation are not included.
Delivery time:CX500 and FertiMix CX600: mid January, 2015.
Installation on site: not included.
Commissioning / user instruction / training: Putting into operation and user training is not included, but can be carried out by HortiMaX Service engineer. When we can start working together with you as our dealer in Vietnam we will include 5 days commissioning on site. Flight ticket, local transport and accommodation are not included.
ISO 9906 standard: ISO 9906 standard for pumps is applicable on all pumps delivered by HortiMaX. In accordance with this standard the capacity is +/- 10% and pressure head +/- 8%.
Prices: excl. VAT.
Payment: 30% down with order (within 8 days), 60% when ready for shipment and 10% within 30 days after invoice date or after installation (whatever comes first)
Warranty: 12 months after shipment on material needing replacement due to manufacturing failures attributable to HortiMaX.
Sales conditions: This offer is made in accordance with the General Terms of Delivery and Sale of HortiMaX and is valid for 30 days. Terms of delivery, sale and purchase other than those of HortiMaX BV do not apply and are explicitly rejected by HortiMaX.
A copy of the General Terms and Conditions has been sent as an attachment with this quotation. Technical specifications are subject to change due to availability and ongoing developments.

Wyniki (łotewski) 1:

2) HortiMaX CX500 programmas/kontroles2.1. klimata kontroli katrā blokā 20 & 222 x gaisa temperatūras - un relatīvā mitruma mērījuma, MTVactive sensors lodziņu, dry / wet bulb (PT100) ar ūdens trauku līmeņa slēdzis un ventilācijas iekārtu; 2x vienu novietotās sānu sienas ventilācijas grupa (laika kontrolē); 2x ēnojums ekrāna grupa (laika kontrolē); 2x HAF recirkulācija ventilācijas grupa2.2. centrālās kontrolesMeteoroloģiskā stacija mērījumiem; Vēja virziens (1-360°); Vēja ātrums (0 - 40 m/S); Nokrišņu daudzums brīdinājumu (Jā/Nē) Ārpus temperatūras mērīšanu (-25 līdz + 50 ° C); Starojuma mērījumu (maks. 1300 w /m2); Ārpus mitruma mērījuma (0-100 %); Barometra spiediena mērījuma (ZS); Jaunākā laika informācija ir svarīga, lai precīzi kontrolēt siltumnīcefekta klimats. Tas ir iemesls, kāpēc meteoroloģiskā stacija funkcija ļauj šo informāciju, lai būtu redzams uz ekrāna nepārtraukti.2.3. ūdens kontrolesApgādes grupa: 1x sistēmas sūkņu vadība; 1x litru skaitītājs grupu pagatavošanas grupai.EK grupas: 1 x EC grupa ar EK mērījumus un sūknis vai vārstu vadības (A + B tvertnes); 1 x EC mērījumu uzraudzība un droša apsardzes precizitāti; 2x mēslojuma tvertnes (A + B)pH grupas: 1 x pH grupa ar pH mērījumiem un sūknis vai vārsta kontrole; 1 x pH mērījumiem monitoringa un droša apsardzes precizitāti; 1 x pH tvertņu skābiApūdeņošanas grupām un vārsti: 1 vārstu grupas; 2 apūdeņošanas vārstu vadības3) HortiMaX CX500 vispārīga informācijaHortiMaX CX500 aparatūras sastāv no centrālā datora un izplata ievadizvades moduļus. Šie ievadizvades moduļus savienoti ar centrālo datoru, izmantojot autobusu sistēmu. HortiMaX CX500 dators tiek darbināts ar Synopta 3 Lite userprogram.3.1. lai atbilstu jūsu prasībām, datoru HortiMaX CX500 ietver:1 pc. HortiMaX CX500/600 centrālajā korpusā, IPC MOD3 paneli. Satur: 1 gab. Trauksmes kartes; 1 gab. VAI 16/AI-164) Synopta 3 Lite interfeisa CX5004.1. CX500 datora interfeiss Synopta 3 LiteSynopta 3 Lite ir lietotājam draudzīga CX500 datoru darbības programmu. Šim lietotājam draudzīga programma piedāvā funkcijas, ieskaitot vizuāli un grafiski pielāgojot iestatīšanas līnijām, backup programmām un datu analīzes diagrammas. Synopta 3 Lite programmas: SynLines 3 grafiskā vidē; SynGraph 3 vēsturiskā grafikas (30 dienas).Lūdzu, ņemiet vērā: PC nav iekļauts šis piedāvājums un trešās personas, ir jāsniedz.5) sensori un pastiprinātāji5.1. klimata un enerģētikas sensoriem un pastiprinātāji2 gab. MTVactive sensora kaste 2 x PT100 psihrometrisko spuldzes + mech.ventilator 4 20mA.MTVactive sensors box 4 - 20 ma5.2. Meteo Go! meteoroloģiskā stacija:Vēja virziens (1-360°); Vēja ātrums (0 - 40 m/S); Nokrišņu daudzums brīdinājumu (Jā/Nē) Ārpus temperatūras mērīšanu (-25 līdz + 50 ° C); Starojuma mērījumi (maks. 1300 w /m2).6) FertiMiX CX600 maisīšanas tvertne devas vienībās; jaudas 60 m ³/h; 3.5. Bar.Piezīme: Šī vienība ir paredzēts apūdeņot 4 Ha (KHU A)FertiMiX CX600 ir paredzēts kontrolēt telpās vai ārā sprinkleru, miglošanas vai pilienu apūdeņošanas sistēmās bez recirkulācija, iesaistot substrātu vai citiem augšanas substrātiem. piemēram, CX600 devas vienībās. FertiMiX CX600 nodrošina, ka taisnība ūdens apjoms tiek piemērota pareizā EK un pH līmeni, īstajā laikā.Pateicoties tās daudz konfigurācijas opciju, FertiMiX CX600 var pielāgot precīzo vajadzībām bērnudārzos vai siltumnīcā pieteikumu.FertiMix CX600 ir piemērota dozēšanas mēslojumu izmantojot tiešās iesmidzināšanas vai maisītājs tvertnēm. Tas ļauj jums vienlaikus deva mēslošanas līdzekļi no līdz 8 mēslojuma tvertnes jebkuras nepieciešamas attiecība.Neatkarīgi no tā, vai strādājat ar vienkāršu vai saliktu mēslošanas, FertiMiX CX600 radīs fertigation maisījums vai recepti, jums nav laika vispār. Sistēma var piegādāt divu EK sensoriem un divi pH sensoriem, kas ļauj jums kontrolēt jūsu apūdeņošanas ūdens sastāvs. Darbojas FertiMiX CX600. FertiMiX CX600 kontrolēs CX500 datoram, izmantojot Synopta 3 Lite darbības programmas. Norādīto elektroenerģijas piegāde ir 3 x 400V/50Hz ar neitrālu un GNDCX600 maisīšanas tvertne devas vienībās, ietilpība 60 m3/h, kas sastāv no: 1 pc. Nerūsējošā tērauda rāmis ar regulējamu kājas izmērs 200 x 120cms; 1 pc. FertiMiX CX600; pie vielām pieskaita arī EC2/pH2 modulim, kas nodrošina EK kontroles un uzraudzības, pH kontroli un uzraudzību un litru skaitīšana CP MOD DO-16/AI-16 modulis kontrolē CX500 datoru. 1 pc. Galvenais slēdzis (maks. 40Amp.) ar aizmugures sienu montāža.Switching of system pump: 1 pc. Manual-Off-Automatic switch for pump control with 24Vac output; 1 pc. Pump switch with soft starter (3-phase, 3-line control) for 11kW pump.System pump: 1 pc. Lowara SHE 50-200/110; 1 pc. Water temperature protection on pump; 1 pc. Main pipe Ø110mm for SHE/FHE50 pump, pressure pipe with ECmeasurement point, branch for shunt pipe and check valve; 1 pc. Filling pipe Ø110mm with Bermad 3” float-controlled membrane valve; 1 pc. Mixing tank, blue polyethylene, contents 500 litres with mounting points for dosing valves, main and shunt pipes; 2 pc. Fertiliser dosing module with venturi, dosing valve 50Hz, manual regulating valve and flow meter for max. 600 l/h, incl. 12 m hose and filter; 1 pc. Acid dosing module with venturi, dosing valve 50Hz, manual regulating valve and flow meter for max. 100 l/h incl. 10 m hose and acid filter; 1 pc. Shunt pipe for max. 5 venturies with ball valve, filter, non-return valve, pressure regulator, pressure gauge and lines for EC en pH measurement.Filtration: 1 pc. Semi automatic filter 4”,130 micron.Sensors: 2 pc. EC sensor, with adaptor mounted in one of the installation points; 2 pc. pH sensor, type PHC, with adaptor mounted in one of the installation points; 1 pc. F15-P0 flow sensor for litre counting and flow monitoring; 1 pc D”125 PP saddle for F15-P0.Extra: 1 pc. calibration fluid ph-4 (20ml); 1 pc. calibration fluid ph-7 (20ml); 1 pc. calibration fluid EC-5 (20ml)6) Pricing Your nett price for CX500 climate/irrigation computer and FertiMiX unit €22.540,-When you build the other 6 greenhouses you need the options below:7.1 Climate controls extra 6 blocks7.2 Water controls (for second unit KHU B)7.3 Climate hardware ,sensors and amplifiers1 pc. HortiMaX CX500 extension cabinet MOD 4.containing: 2 pcs. DO-16/AI-16; 1 pcs. DO-16/AI-16; 6 pcs. MTV active sensor box, 2 x PT100 dry/wet bulb + mech. ventilator 4-20mA. MTVactive sensor box 4-20mA7.3 Irrigation hardware and sensors.1 pcs FertiMiX CX600 mixing tank dosage unit; capacity 60 m³/Hr; 3.5 Bar.This unit is needed for KHU B has exactly the same specifications as you see above at point 6.Option Pricing: Your nett price 1x extra FertiMix unit and 6 blocks extension: €23.690,--NOTE: You need the extra FertiMiX unit when you start building more than 4 Ha, when you build the 2 other blocks in KHU A you only need some extra software and 2 MTV active sensors for temperature and humidity measurement.Terms and Conditions:Delivery: Ex Works HortiMaX Pijnacker, the Netherlands (unpacked)Freight costs, insurance and transportation are not included.Delivery time:CX500 and FertiMix CX600: mid January, 2015.Installation on site: not included.Commissioning / user instruction / training: Putting into operation and user training is not included, but can be carried out by HortiMaX Service engineer. When we can start working together with you as our dealer in Vietnam we will include 5 days commissioning on site. Flight ticket, local transport and accommodation are not included.ISO 9906 standard: ISO 9906 standard for pumps is applicable on all pumps delivered by HortiMaX. In accordance with this standard the capacity is +/- 10% and pressure head +/- 8%.
Prices: excl. VAT.
Payment: 30% down with order (within 8 days), 60% when ready for shipment and 10% within 30 days after invoice date or after installation (whatever comes first)
Warranty: 12 months after shipment on material needing replacement due to manufacturing failures attributable to HortiMaX.
Sales conditions: This offer is made in accordance with the General Terms of Delivery and Sale of HortiMaX and is valid for 30 days. Terms of delivery, sale and purchase other than those of HortiMaX BV do not apply and are explicitly rejected by HortiMaX.
A copy of the General Terms and Conditions has been sent as an attachment with this quotation. Technical specifications are subject to change due to availability and ongoing developments.